|
|
BA35
|
Computerised numeric control - CNC
|
|
|
|
|
|
|
TECHNICAL DATA
Shafts diameter mm.35
Rolls diameter ( on request )
Drive motor 1,1 KW ( 50 HZ )
Pump motor 3 KW ( 50 HZ )
Heat exchanger for oil cooling
Hydraulic cylinder thrust power kg 5500
Variable rotation speed rpm 1-30
Variable translation speed of bending roll 0-31 mm/sec
Three driven rolls with smooth surface
Steel frame FE 430B, heavily dimensioned
Shafts in high strength alloy steel 38NCD4, heat treated and ground to precision tollerance
Gears in special alloy steel 38NCD4 with precision ground teeth
Combination horizontal & vertical working position
Machine weight 425 kg
Console weight 94 kg
Machine dimensions mm. Base 740x1020 Height 1110
Console dimensions mm. Base 590x710 Height 1200
-
|
|
OPERATING CHARACTERISTICS
Is a universal section bending machine with Computerised Numeric Control (CNC), can operated manually or automatically, desired output can be accomplished by inputting the desired bending radius into the computer for production of simple bends as well as variable or multiple radius bend.
The electronic control consists of a PLC central 32 bit system for control of the moving of the AXIS A1-A2 and of an industrial computer 650MHz - RAM-DIMM 256MB, complete with HD Compact Flash 1GB. Monitor IOFM - LCD-VGA 15" coloured screen with active matrix for the interface with the operator, both of them assembled on detached mobile pulpit.
Programs are supported by archiving a variety of material types and profile cross section data as well as by storing the actual bending programs.
Variable radius “PROBENDING ® system" and tangent multiple bends are accomplished by means of blending or interpolating between the different radius.
All machine movements include acceleration and deceleration ramps parameters, unit can invert a bending cycle and then stop, standard program options include mirror imaging of shapes to speed the input time and “tech-in” auto learning functions.
Rise/Descent of the bending roller is ( 0 to 31 mm/sec ) and of profile advance rate ( from 1 to 30 RPM ) are variable and electronically controlled.
Personal computer is linked directly to the machine using the USB or RS-232 serial port with auto diagnostic and automatic set up of the machine.
|
|
STANDARD EQUIPMENT
Control console
Industrial PC
PC application program
Rotation control pedal
Service tools kit
Instruction manual
|
ATTENTION: This machine is not supplied with standard rolls.
- CAPACITY BASED UPON MILD STEELS MAX. TENSILE 40 KG/mm2 BASED ON 60.000
-
|
