CP20
CP30 E
CP30R
CP30PR
Z402
ZH402
CP40
CP40H
CPH40
CPH60
CPS20
CPS35
CPS50
BA20
BA35
BA50
CPD80
CPD100
CPD80CN
CPD100CN
BA50
Brochure

Computerised numeric control - CNC





TECHNICAL DATA
Shafts diameter mm.50
Rolls diameter (on request)
Drive motor 2,2 KW ( 50 HZ )
Pump motor 4 KW ( 50 HZ )
Heat exchanger for oil cooling
Hydraulic cylinder thrust power kg 13500
Variable rotation speed rpm 1-22
Variable translation speed of bending roll 0-17 mm/sec
Three driven rolls with smooth surface
Steel frame, heavily dimensioned
Block ways with Z-Block anti-deflection system ( Patented )
Shaft in high strength alloy steel 38NCD4, heat treated and ground to precision tollerance
Gears in special alloy steel 38NCD4 with precision ground teeth
Clutch coupling mounted on the upper roll ( Torque Limiting Device )
Combination horizontal & vertical working position

Machine weight 670 kg
Console weight 94 kg
Machine dimensions mm. Base 850x1130 Height 1260

Console dimensions mm. Base 590x710 Height 1200


OPERATING CHARACTERISTICS
 

Is a universal bending machine with Computerised Numeric Control (CNC), who works in manual or in automatic mode and allows the direct insertion of the bending radius and of the data to obtain multiple forms and different developments.
The electronic control consists of a PLC central 32 bit system for control of the moving of the AXIS A1-A2 and of an industrial computer 1.86GHz - RAM-DDR3 2GB, complete with HD C-Fast 4GB. Monitor IOFM - LCD-VGA 15" coloured screen with active matrix for the interface with the operator, both of them assembled on detached mobile pulpit.
BPR multilingual bending program “PROBENDING ® system" facilitated by the acquisition of the type of material and the section of the profile, with possibility of archiving the works performed and default bends. Execution of variable radius bends, with interpolated axes system.Ramps of acceleration and deceleration, stop and inversion of the cycle, self-learning program and mirror cycle.
Electronic control of the speed settings of moving of the bending roll (up to 32 mm/sec) and of the profile displacement (up to 30 RPM) in manual or automatic cycle.
Direct connection to a personal computer using the RJ-45 ( lan ) port with auto diagnostic and automatic set up of the machine. USB connection for the transfer and the copy of the bending programs
.


STANDARD EQUIPMENT
Control console
Industrial PC
PC application program
Rotation control pedal
Service tools kit
Instruction manual


ATTENTION: This machine is not supplied with standard rolls.


CAPACITY BASED UPON MILD STEELS MAX. TENSILE 40 KG/mm2 BASED ON 60.000


INDICATIVE DATA OF BENDING CAPACITY

CAPACITIES ARE EXPRESSED FOR BENDINGS EXECUTED IN ONLY ONE PASSAGE
SECTION

SIZE (mm)

DIA INT. MIN. (mm)
NOTES


33 x 2, 9 - 1 GAS
60,3 x 2,9

250
600
SPECIAL ROLLS


80 x 2

800
SPECIAL ROLLS


20 x 20 x 1,5
50 x 50 x 4

300
1000
SPECIAL ROLLS


25 x 15 x 1,5
70 x 40 x 3

300
1000
SPECIAL ROLLS


30 x 15 x 2
90 x 30 x 3

400
1400
SPECIAL ROLLS


30 x 15 x 2
70 x 30 x 2

400
1000
SPECIAL ROLLS